Industrial Safety Products for Traffic, Parking & Site Access

Orange PVC cone body with dual white retro-reflective bands, seated on a wind-stable 37×37 cm molded rubber base. Engineered for parking, roadways and construction sites. Meets EN 13422 and MUTCD visibility grades — ready to brand with your logo and Pantone color.

Environmentally friendly TPE (thermoplastic elastomer) cone with translucent-orange body and a single wide white reflective band. Lightweight 0.45 kg, integrated square base — perfect for schools, warehouses, event queues and any indoor-outdoor use where recyclability matters.

Full-size 1-metre PE polyethylene cone with three high-intensity prismatic (HIP) reflective bands and a heavy 3.5 kg rubber base. Built for interstate construction zones, night highway work and any location where MUTCD compliance and long-term outdoor durability matter.

Folds flat to 3.5 cm for easy trunk storage, pops up to 45 cm in one motion. Durable orange nylon body with 2 white reflective bands and an integrated rechargeable LED cap for nighttime visibility. Perfect for roadside emergency kits, fleet vehicles, tow trucks and rapid deployment.

T-top delineator with flexible PU body and weighted rubber base. Signature T-shaped rounded head for maximum daylight visibility. Bounces back after vehicle impact — ideal for driveway separation, work-zone taper, and construction site marking. Choosing between marker and barrier? See our driveway access control guide.

Height-tiered flexible HDPE traffic bollard with high-brightness prismatic reflective film. Collapses under vehicle impact and springs back to full height. Three standard heights (50 / 80 / 120 cm) cover parking, driveway and lane-separation applications. Choosing between marker and barrier? See our driveway access control guide.

Molded from heavy-duty 100% recycled SBR/EPDM rubber, with two yellow retro-reflective stripes and pre-drilled countersunk anchor holes. Fits a standard parking bay curb. Sized from 600 mm through 1800 mm to cover cars, light trucks and heavy freight yards. Read our wheel stop specification & liability guide for anchoring rules on asphalt vs concrete.

Premium-grade 1.8 metre (72 inch) rubber curb for trucks, forklifts and heavy vehicles. Yellow retro-reflective stripes for night visibility, UV and freeze-thaw resistant. The standard for garages, warehouses and freight yards. Read our wheel stop specification & liability guide for anchoring rules on asphalt vs concrete.

Signature bright royal-blue rubber wedge with a deeply recessed carry handle. 6 sizes cover cars, RVs, trailers, trucks, motorcycles and light aircraft up to 15 t static load. Anti-roll wedge geometry + high-friction rubber compound = the standard ground-control chock for airport ramp operations and heavy fleet yards.

Laminated rubber core bonded to a polished steel face plate — engineered for the punishment of freight docks and cold regions where standard rubber cracks. Absorbs impact energy across the full lamination stack, then wears through the steel plate first (replaceable) rather than the rubber body.

Heavy-duty solid rubber cylindrical fender for piers, ports and boat docks. Marine-grade EPDM rubber compound resists salt water, UV and ozone. Available in D, W, cylinder and custom profiles with mounting hole patterns to match your existing pier plate.

A low-profile 3-channel cable protector for pedestrian, cart and light-vehicle routes. The 35 mm body, black rubber base, hinged yellow-orange lid and three internal channels keep AV, power and network runs apart. Request the measured side-profile drawing and verify the complete route before specifying it for accessibility. Read our ADA cable ramp buyer’s guide for the route-level checklist.

Heavy-duty 5-channel cable protector rated for cranes, forklifts and freight vehicles. Five internal cable channels each up to 42 mm diameter, hinged yellow lids for tool-free access, modular interlocking ends. The standard for construction sites, film shoots and industrial events. Planning a pedestrian crossing? See our ADA cable protector guide.

Polished chrome stainless steel stanchion with a 2-metre retractable red belt. Weighted cast-iron base with rubber floor pad — indoor and outdoor use. Perfect for airport queues, banks, hotels, exhibitions, cinemas and any premium retail environment.

Bright orange water-filled plastic traffic barrier for road works and event perimeter. Hollow HDPE body with fill/drain plugs — empty and light for transport, 150 kg heavy when filled with water on site. Interlocking male/female ends for connecting multiple units. Choosing between marker and barrier? See our driveway access control guide.

1830 mm modular rubber speed bump section with alternating black-and-yellow reflective stripes. Four pre-drilled anchor holes, interlocking male/female ends, drainage channel underneath. Snap 5+ sections into any length across your parking lot entry lane. Installing it yourself? Read our speed bump anchoring guide for asphalt vs concrete fasteners.

Solar-powered remote-controlled parking space barrier lock. Yellow steel frame with black rubber cushioning, folds flat to ground when unlocked and pops up 60 cm when locked. Ideal for private parking spaces, EV charging stalls and reserved bays. Choosing between marker and barrier? See our driveway access control guide.

Wedge-shaped rubber ramp for smooth low-clearance car access over a raised curb. Black rubber body with yellow reflective safety stripe, 2 pre-drilled anchor holes, side-interlocking to build longer runs. The standard for residential driveways, low-clearance sports cars, and forklift bay entrances. Installing it yourself? Read our speed bump anchoring guide for asphalt vs concrete fasteners.

Heavy-duty 2.4×1.2 metre HDPE ground protection mat with hexagonal grip tread. Protects grass, mud and soft ground from heavy equipment. perimeter for easy 2-person handling, side hooks for connecting multiple mats. Rated for 80-ton loads.

L-shaped soft EVA foam corner guard with bright yellow-and-black diagonal warning stripes and retroreflective sheeting. Adhesive backing for tool-free installation on columns and racking corners. Absorbs impact from cars, forklifts and shopping carts. Read our forklift blind corner guide for mirror sizing and mounting angle.

Rigid PVC L-shaped corner guard with fluorescent yellow high-intensity reflective sheeting. 4 pre-drilled screw holes for permanent installation on warehouse racking, garage columns and loading dock corners. The premium alternative to soft foam guards. Read our forklift blind corner guide for mirror sizing and mounting angle.

80 cm diameter polycarbonate convex safety mirror with red-and-white protective bezel. The standard for parking garage blind spots, warehouse aisles, factory T-intersections and industrial safety. Read our forklift blind corner guide for mirror sizing and mounting angle.

100 cm large outdoor convex traffic road turn mirror with yellow weather-shielded back cover, mounted on a 2-metre steel pole with concrete base plate. Full turn-key intersection blind-spot solution for country roads, driveway exits and industrial site intersections. Read our forklift blind corner guide for mirror sizing and mounting angle.

High-visibility ANSI-107 Class 2 safety vest with integrated LED strips along shoulders and back. Fluorescent yellow polyester body with 2 silver retroreflective bands, USB-C rechargeable battery. Perfect for construction crews, cyclists, tow drivers and any low-light worker.